Accepted Papers

The following papers have been accepted for presentation at ACMSM25

  • P001     Zhang, H., Wang C.M.     Australia (QLD)     UNCOVERING PHYSICAL STRUCTURAL MODEL BEHIND FINITE DIFFERENCE MODEL FOR VIBRATION ANALYSIS OF PLATES
  • P003     Kalakada, Z., Doh J.H.     Australia (QLD)     STUDIES ON RECYCLED WASTE GLASS POWDER AS BINDER IN CONCRETE
  • P005     Yang, J.P., Chen, Bo-How    Taiwan    IDENTIFICATION OF BRIDGE FREQUENCIES BY TWO-MASS VEHICLE MODEL
  • P006     Tang, Z., Li, W.G., Li, P.R., Shah, S.P.     Australia (NSW)     DURABILITY OF SUSTAINABLE CONSTRUCTION MATERIALS
  • P008    Hadigheh, S.A., Dias-da-Costa, D.     Australia (NSW)     SHEAR STRENGTH OF CROSS LAMINATED TIMBER-CONCRETE CONNECTIONS REINFORCED WITH CARBON FIBRE POLYMER COMPOSITES
  • P009    Raza, S., Menegon, Scott J., Tsang, Hing-Ho, Wilson, John L.     Australia (VIC)    EXPERIMENTAL TESTING PROGRAM TO INVESTIGATE THE COLLAPSE DRIFT CAPACITY OF LIMITED DUCTILE HIGH-STRENGTH RC COLUMNS
  • P011     Sarker, M., Hadigheh, S.A., Dias-da-Costa, D.     Australia (NSW)    STEREOSCOPIC MODELLING AND MONITORING OF THE ROUGHNESS IN CONCRETE PAVEMENTS
  • P012     Wei, N., Zhang, Y.Y.    Australia (NSW)    EFFICIENT CHAIRALITY SELECTION METHOD FOR BLACK PHOSPHORENE NANORIBBONS
  • P013     Huang, Q, Hamed, E, Gilbert, R.I.,     Australia (NSW)    EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE FLEXURAL BEHAVIOUR OF COMPOSITE PREFABRICATED CONCRETE SANDWICH PANELS
  • P014     Franklin, N., Heffernan, E., McCarthy, T.J.     Australia (NSW)     THE CASE FOR COLD-FORMED STEEL CONSTRUCTION FOR THE MID-RISE RESIDENTIAL SECTOR IN AUSTRALIA: A SURVEY OF INTERNATIONAL CFS PROFESSIONALS
  • P015     Khan, H.A., Castel, A., Mahmood, A.H.     Australia (NSW)     PERFORMANCE OF FLY ASH-BASED GEOPOLYMER MORTAR AGAINST SULPHURIC ACID
  • P017     Gilbert, B.P., Underhill, I.D., Fernando, D., Bailleres, H.     Australia (QLD)     STRUCTURAL VENEER-BASED CIRCULAR HOLLOW SECTIONS MANUFACTURED FROM EARLY TO MIDROTATION (JUVENILE) HARDWOOD PLANTATION LOGS (abstract only)
  • P018     Ma, F.H., Gilbert, B.P., Guan, H., Xue, H.Z., Lu, X.Z., Li, Y., Loo, Y.C.     Australia (QLD)     LOAD TRANSFER AND FAILURE MECHANISMS OF RC FLAT PLATE STRUCTURES UNDER A CORNER COLUMN REMOVAL SCENARIO
  • P019     Nguyen, H.H., Gilbert, B.P., McGavin, R.L., Bailleres, H.     Australia (QLD)     EMBEDMENT STRENGTH OF LVL AND CROSS-BANDED LVL MANUFACTURED FROM BLENDING HARDWOOD AND SOFTWOOD SPECIES
  • P020     Wang, X.Q., Tao, Z., Hassan, M.K., Hou, C.     Australia (NSW)     STRESS–STRAIN CURVES FOR HIGH STRENGTH STEEL BISALLOY 80
  • P021     Majeed, Z.Z.A., Yong, A.C.Y., Perera, J.S., Lam, N.T.K., Menegon, S.J., Gad, E.    Australia (VIC)     CONTACT FORCE GENERATED BY IMPACT OF BOULDER ON CONCRETE BARRIERS
  • P023    Xue, H.Z., Guan, H., Gilbert, B.P., Lu, X.Z., Li, Y.     Australia (QLD)     PREDICTING PUNCHING AND POST-PUNCHING SHEAR CAPACITIES OF RC SLAB-COLUMN CONNECTIONS
  • P024     Diao, M.Z., Li, Y., Guan, H., Lu, X.Z, .Gilbert, B.P.     Australia (QLD)     NUMERICAL MODELLING OF THE PROGRESSIVE COLLAPSE OF REINFORCED CONCRETE FRAMES WITH DIFFERENT LATERAL RESTRAINTS
  • P027     Lai, S.K., Zhang, L.H.     Hong Kong     FREE VIBRATION ANALYSIS OF CRACKED ORTHOTROPIC RECTANGULAR PLATES UNDER THERMAL EFFECT
  • P030     Masaeli, M., Gilbert, B.P., Karampour, H., Underhill, I.D., Lyu, C.H., Gunalan, S., Guan, H.     Australia (QLD)     FULL-SCALE AND QUARTER-SCALEMOMENTAND SHEAR BEHAVIOUR OF THREE TYPES OF BEAM-TO-COLUMN CONNECTORS USED IN MASS TIMBER BUILDINGS
  • P032     Perera, J.S., Lam, N.T.K., Disfani, M.D., Gad, E.     Australia (VIC)     IMPACT RESPONSE BEHAVIOUR OF GABION CELLS FILLED WITH DIFFERENT CUSHION MATERIALS
  • P033     Yong, A.C.Y., Perera, J.S., Majeed, Z.Z.A., Lam, N.T.K., Menegon, S.J., Gad, E.     Australia (VIC)     PENDULUM IMPACT TEST ON A REINFORCED CONCRETE WALL
  • P039     Hassan, M.K., Tao, Z., Katwal, U.     Australia (NSW)     BEHAVIOUR OF THROUGH PLATE CONNECTIONS TO CONCRETE-FILLED STAINLESS STEEL COLUMNS
  • P040     Hassan, M.K., Tao, Z., Liao, F.     Australia (NSW)     NUMERICAL STUDY OF COLUMN-COLUMN CONNECTIONS FOR PREFABRICATED CONCRETE-FILLED STEEL COLUMNS
  • P042     Darzi, S., Karampour, H., Gilbert, B.P., Bailleres, H.     Australia (QLD)     EFFICIENCY OF SANDWICH BAMBOO-PLYWOOD FLOOR PANELS WITH VARIOUS CORE CONFIGURATIONS
  • P043     Wang, W., Wu, C.     Australia (NSW)     NUMERICAL SIMULATION OF FRP-CONCRETE-STEEL DOUBLESKIN TUBULAR COLUMN UNDER LATERAL IMPACT LOADING
  • P046     Yang, L., Lin, X., Gravina, R., Xie, Y.M.     Australia (VIC)     PERFORMANCE OF STEEL FIBRE REINFORCED CONCRETE UNDER HIGH STRAIN RATES
  • P047     Lyu, C.H., Gilbert, B.P., Gunalan, S., Karampour, H., Underhill, I.D., Masaeli, M., Guan, H.     Australia (QLD)     PROGRESSIVE COLLAPSE (ROBUSTNESS) BEHAVIOUR OF MASS TIMBER FRAME BUILDING SUBASSEMBLIES
  • P050     Yang, Z., Kun, C., Chouw, N.     New Zealand     IMPACT OF SPATIAL VARIATION OF GROUND MOTIONS ON THE SEISMIC PERFORMANCE OF A BRIDGE STRUCTURE
  • P051     Chen, J., Lv, Y., Li, Z.X., Chouw, N.     New Zealand     INVESTIGATION OF THE PROPERTIES OF NATURAL FIBRE REINFORCED POLYMER‐ CONCRETE COMPOSITE
  • P062     Wu, Y.F., Hu, B.     Australia (VIC)     VARIATION OF SHEAR STRENGTH COMPONENTS OF RC BEAMS
  • P066     Mainey, A.J., Gilbert, B.P., Bailleres, H., Gunalan, S., Smith, M.D.     Australia (QLD)     CAPACITY OF NAILPLATED JOINTS WITH NEW TOOTH PROFILES AND SUBJECTED TO ACCELERATED MOISTURE CYCLING
  • P069     Stewart, M.G., Netherton, M.D.     Australia (NSW)     EXPLOSIVE BLAST LOAD FACTORS AND RELIABILITY-BASED DESIGN OF RC COLUMNS FOR PROTECTIVE STRUCTURES
  • P070     Ariyanayagam, A.D., Mahendran, M.     Australia (QLD)     POST-FIRE CAPACITY OF LIGHT GAUGE STEEL FRAMED WALLS
  • P071     Ariyanayagam, A.D., Mahendran, M.     Australia (QLD)     FIRE PERFORMANCE OF LSF WALL SYSTEMS MADE OF LOW AND HIGH STRENGTH STEEL STUDS
  • P073     Zaghloul, A., Ranaweera, P., Mohotti, D.     Australia (NSW)     ASSESSMENT OF BLAST EFFECTS ON PASSENGERS IN UNDERGROUND TRAINS
  • P075     Yang, Z.J., Yan, G.     China     DETECTION OF IMPACT DAMAGES FOR COMPOSITE STRUCTURE BY ELECTRICAL IMPEDANCE TOMOGRAPHY
  • P076     Tang, J.F, Lu, X., Yan, G.     China     MONITORING THE EVOLUTION OF FATIGUE DAMAGE FOR COMPOSITE USING GUIDED WAVES
  • P079     Al-Hedad, A.S.A.A., Hadi, M.N.S.     Australia (NSW)     INITIATION OF CRITICAL CRACK OF CONCRETE PAVEMENTS REINFORCED WITH GEOGRID
  • P080     Al-Hedad, A.S.A.A., Hadi, M.N.S.     Australia (NSW)     HIGH STRENGTH CONCRETE PRISMS REINFORCED WITH GEOGRID AT HIGH TEMPERATURE
  • P081     Fan, Y., Xiang, Y., Shen, H.S     Australia (NSW)     NONLINEAR DYNAMIC BEHAVIOURS OF FG-GRC LAMINATED BEAMS
  • P084     Rumbayan, R., Sudarno, Ticoalu, A.     Indonesia     FEASIBILITY STUDY ON THE DEVELOPMENT OF COIR-CONCRETE BLOCKS
  • P091     Gattas, J., Al-Qaryouti, Y., Baber, K.     Australia (QLD)     RECENT RESEARCH PROGRESS ON THE ‘PLATE HOUSE’ LOW-COST FOLDED SANDWICH STRUCTURE (abstract only)
  • P092     Bui, D.K., Nguyen, T., Nguyen-Zuan, H., Ngo, T.     Australia (VIC)     AN ELECTROMAGNETISM – FIREFLY ALGORITHM FOR STRUCTURAL OPTIMISATION
  • P094     Le, V.T., Ghazlan, A., Ngo, T.      Australia (VIC)     3D PRINTING AND NUMERICAL MODELLING OF CONCH- INSPIRED LAMELLAR STRUCTURES
  • P096     Nguyen, T.N., Bui, D.K., Ghazlan, A., Kashani, A., Ngo, T.     Australia (VIC)     DEEP LEARNING WITH HIGH ORDER NEURON FOR THE PREDICTION OF FOAMED CONCRETE STRENGTH
  • P108    Alsanat, H., Gunalan, S, Guan, H.     Australia (QLD)     NUMERICAL STUDY ON ALUMINIUM LIPPED CHANNEL SECTIONS SUBJECTED TO WEB CRIPPLING UNDER TWO-FLANGE LOAD CASES
  • P109     Rouholamin, M., Gunalan, S, Karampour, H.     Australia (QLD)     SHEAR TESTS OF ALUMINIUM LIPPED CHANNEL BEAMS
  • P110     Akbari, M., Gunalan, S, Gilbert, B.P., Guan, H., Baleshan, B.    Australia (QLD)     DESIGN RULES FOR ALUMINIUM SUB-HEADS IN FAÇADE SYSTEM
  • P120     Lima, M., Salamy, R.     Australia (VIC)     INVESTIGATION AND STRENGTHENING OF CRACKED WEB OF BROAD FLANGE BEAMS OF RAILWAY BRIDGE
  • P122     Kamadjaja, S., Fragomeni, S., Van Staden, R.C.     Australia (VIC)     NUMERICAL ANALYSIS OF REINFORCED CORBEL WIDTH USING HIGH STRENGTH CONCRETE
  • P123     Van Staden, R.C., Fragomeni, S.     Australia (VIC)     MOISTURE DAMAGE IN ASPHALT PAVEMENTS AT AGGREGATE-ASPHALT INTERFACE – A FINITE ELEMENT STUDY
  • P124     Ou, Y., Gattas, J.M., Fernando, D.     Australia (QLD)     A NOVEL HYBRID FRP-TIMBER-CONCRETE FLOOR SYSTEM WITH DIGITALLY FABRICATED CORE (abstract only)
  • P125     Xu, Z., Hanzic, L., Karlovsek, J.     Australia (QLD)     TOUGHNESS OF POLYPROPYLENE FIBRE-REINFORCED SPRAYED GEOPOLYMER CONCRETE
  • P127     Ullah, S.N., Hoassin, M.S., Hu, Y., Fourie, A.     Australia (QLD)     NUMERICAL MODELLING OF RECTANGULAR FOOTINGS ON SAND EMBANKMENTS OVER MINE TAILINGS
  • P129      Youssf, O., Hassanli, R., Mills, J.E.     Australia (SA)     CYCLIC BEHAVIOR OF STEEL-RUBCRETE-STEEL SANDWICH BEAMS
  • P132     Guo, Y., Zhang, Y.X., Soe, K.     Australia (NSW)     INFLUENCE OF SILICA FUME AND FLY ASH ON MECHANICAL PROPERTIES OF MAGNESIUM OXYCHLORIDE CEMENT
  • P133     Meng, D., Zhang, Y.X., Lee, C.K.     Australia (NSW)     STRUCTURAL PERFORMANCE OF STEEL REINFORCED PVA-ECC BEAMS SUBJECTED TO FATIGUE FLEXURAL LOADING
  • P134     Li, J., Wu, C.     Australia (NSW)     EXPERIMENTAL STUDY ON ULTRA-HIGH PERFORMANCE CONCRETE COLUMNS AGAINST LOW-VELOCITY IMPACT
  • P136     Haritos, N.     Australia (VIC)     TECHNOLAB – INNOVATIVE EXPERIENTIAL LEARNING PLATFORM FOR MECHANICS AND DYNAMICS
  • P137     Wimalasiri, M., Robert, D. J., Li, C.Q.     Australia (VIC)     NUMERICAL INVESTIGATION ON THE PERMEABILITY DEGRADATION OF STRESSED CONCRETE
  • P141     Saleh, Z., Neaz Sheikh, M., Remennikov, A.M., Basu, A.     Australia (NSW)     RESPONSE OF CONCRETE BEAMS REINFORCED WITH GFRP BARS UNDER STATIC LOADS
  • P147     Roychowdhury, A., Wang, C.M., Fernando, D.     Australia (QLD)     EFFECT OF END SUPPORT HEIGHTS ON VIBRATION FREQUENCIES OF DEEP BEAMS
  • P151     Yu, Y., Chen, X., Yao, J., Wu, D., Gao, W.     Australia (NSW)     MODELLING THE CHLORIDE AEROSOL ATTACK ON CEMENTITIOUS MATERIALS
  • P152     Al-Yousuf, A., Gad, E., Abdouka, K., Lee, J., Pokharel, T.     Australia (VIC)     INVESTIGATIONS OF EARLY AGE MATERIAL PROPERTIES OF NORMAL AND HIGH STRENGTH CONCRETE INCLUDING FRACTURE ENERGY
  • P154     Jayatilake, I.N., Karunasena, W.     Australia (QLD)     3D NUMERICAL SIMULATION AND DYNAMIC ANALYSES OF GFRP COMPOSITE SLABS
  • P157     Maizuar, M., Zhang, L., Miramini, S., Mendis, P., Duffield, C.     Australia (VIC)     STRUCTURAL HEALTH MONITORING OF BRIDGES USING ADVANCED NON-DESTRUCTIVE TESTING TECHNIQUE
  • P158     Ngan, J.W., Caprani, C.C., Bai, Y.     Australia (VIC)     NUMERICAL VALIDATION FRAMEWORK OF GFRP FLOOR MODELS USING STRUCTURAL HEALTH MONITORING
  • P161     Zhang, Z., Aghdamy, S., Dhanasekar, M., Thambiratnam, D.P.     Australia (QLD)     DEVELOPMENT OF A RAISED RAIL-ROAD CROSSING
  • P162     Abdel-Jaber, M., Abdel-Jaber, M.S., Beale, R.G., Shatara, N.K.     UK     CYCLIC LOADING APPLIED TO SLEEVE COUPLERS FOR TUBE AND FITTING SCAFFOLDS
  • P163     Alhussainy, F., Sheikh, M.N., Hadi, M.N.S.     Australia (NSW)     BOND BEHAVIOUR OF STEEL TUBES IN SELF-COMPACTING CONCRETE
  • P164     Alhussainy, F., Sheikh, M.N., Hadi, M.N.S.     Australia (NSW)     FLEXURAL BEHAVIOUR OF SELF-COMPACTING CONCRETE COLUMNS REINFORCED WITH STEEL TUBES
  • P175     Melhem, M.M., Caprani, C.C., Stewart, M.G.     Australia (VIC)     MODEL ERROR FOR AUSTRALIAN CODE SHEAR DESIGN OF CONCRETE STRUCTURES
  • P176     Melhem, M.M., Caprani, C.C., Lui, T.M.T., Ng, A.     Australia (VIC)     LATERAL DISTRIBUTION FACTORS IN HEAVY VEHICLE BRIDGE ACCESS DECISION-MAKING
  • P178     Farhan, N.A., Sheikh, M.N., Hadi, M.N.S.     Australia (NSW)     THE EFFECT OF DIFFERENT TYPES OF STEEL FIBRE ON THE BOND BETWEEN AMBIENT CURED GEOPOLYMER CONCRETE AND DEFORMED STEEL BAR
  • P179     Farhan, N.A., Sheikh, M.N., Hadi, M.N.S.     Australia (NSW)     DESIGN OF GEOPOLYMER CONCRETE WITH FLY ASH USING THE TAGUCHI METHOD
  • P180     Al-Saadi, A.U., Aravinthan, T., Lokuge, W.     Australia (QLD)     NUMERICAL INVESTIGATION ON HOLLOW PULTRUDED FIBRE REINFORCED POLYMER TUBE COLUMNS
  • P181     Cherry, R., Manalo, A., Karunasena, W., Stringer, G.     Australia (QLD)     OPPORTUNITIES FOR OUT-OF-GRADE SAWN PINE IN
    SUSTAINABLE BUILDING SYSTEMS
  • P184     Liu, Z., Wu, D., Gao, W., Li, G.     Australia (NSW)     STATIC BUCKLING ANALYSIS OF FUNCTIONALLY GRADED SHALLOW ARCHES CONSIDERING GEOMETRIC NONLINEARITY
  • P185     Keerthana, K., Chadra Kishen, J.M.     India     EFFECT OF FATIGUE LOADING IN THE FORMATION OF FRACTURE PROCESS ZONE IN CONCRETE
  • P187     Rasappagari, M.R.R., Karunasena, W., Lokuge, W.     Australia (QLD)     FLEXURAL BEHAVIOUR OF FUNCTIONALLY GRADED- GRAPHENE REINFORCED COMPOSITE PLATES
  • P188     Gabriel, K.L., Karunasena, W., Cherry, R.     Australia (QLD)     POTENTIAL OF SOFTWOOD ENGINEERED TIMBER WITH GRAPHENE
  • P189     Khan, N.Y., Lau, D.T., Khoo, H.A     Canada     SIMULATION OF VIBRATION MONITORING DATA OF DAMAGED STRUCTURES WITH UNCERTAINTIES
  • P194     Chen, F., Li, C.Q., Baji, H.     Australia (VIC)     NON-UNIFORMITY OF POROUS BAND IN STEEL- CONCRETE INTERFACE AND ITS INFLUENCE ON FORMATION OF CORROSION PRODUCTS
  • P197     Kristombu Baduge, K.S., Mendis, P., Portella, J.     Australia (VIC)     IMPORTANCE OF SELECTING SUITABLE AGGREGATE TO PRODUCE VERY-HIGH-STRENGTH CONCRETE (> 100 MPA)
  • P198     Al-Mashaykhi, M., Rajeev, P., Wijesudara, K.     Australia (VIC)     PERFORMANCE OF STEEL CONCENTRIC BRACED FRAMES SUBJECTED TO SEVERE AND MODERATE EARTHQUAKES
  • P199     Tareq, S., Xiang, Y., Zhang, Y.Y., Ye, L., Yang, C.     Australia (NSW)     FABRICATION AND CHARACTERISATION OF NANO-ADDITIVE REINFORCED POLYMERIC COMPOSITES
  • P201     Qu, Y.L., Song, C.M.     Australia (NSW)     SEISMIC INPUT MODEL FOR TIME-DOMAIN ANALYSIS OF TWO-DIMENSIONAL WAVE PROPAGATION BASED ON THE SCALED BOUNDARY FINITE ELEMENT METHOD (abstract only)
  • P203     Saputra, A. A., Song, C.M.     Australia (NSW)     THREE-DIMENSIONAL NUMERICAL HOMOGENISATION USING SCALED BOUNDARY FINITE ELEMENT METHOD (abstract only)
    P204     Baji, H., Li, C.Q., Chen, F.     Australia (QLD)     A PROBABILISTIC STUDY ON TIME TO COVER CRACKING DUE TO CORROSION IN REINFORCED CONCRETE STRUCTURES
  • P210     Saleh, H., Abduka, K., Kalfat, R., Al-Mahaidi, R.     Australia (VIC)     SHEAR STRENGTHENING OF RC FLAT SLABS USING POST-INSTALLED STEEL BOLTS
  • P215     Zhong, A., Sofi, M., Zhou, A., Lumantarna, E., Mendis, P.A.     Australia (VIC)     IN-SITU STRENGTH DEVELOPMENT OF CONCRETE AT EARLY AGES
  • P219     Xia, M., Nematollahi, B., Sanjayan, J.     Australia (VIC)     ENHANCING STRENGTH OF POWDER-BASED 3D PRINTED GEOPOLYMERS FOR DIGITAL CONSTRUCTION APPLICATIONS
  • P220     Nematollahi, B., Sanjayan, J.     Australia (VIC)     MICROMECHANICAL INVESTIGATION OF AMBIENT TEMPERATURE CURED “JUST-ADD-WATER” STRAIN- HARDENING GEOPOLYMER COMPOSITE: EFFECTS OF TYPE OF FIBER AND TYPE OF SLAG
  • P224    Almalome, M.H.A., Yu, T., Hadi, M.N.S.     Australia (NSW)     TRIAL MIXES OF PERLITE CONCRETE AND VERMICULITE CONCRETE
  • P225    Almalome, M.H.A., Yu, T., Hadi, M.N.S.     Australia (NSW)     A NEW ANCHOR FOR DIRECT TENSILE TEST OF MOULDED AND PULTRUDED GLASS-FIBRE REINFORCED POLYMER (GFRP) GRATING MESH
  • P226    Mudiyanselage, S.N., Rajeev, P., Gad, E., Sriskantharajah, B., Flatley, I.     Australia (VIC)    NON-DESTRUCTIVE TECHNIQUES FOR CONDITION ASSESSMENT OF TIMBER UTILITY POLES
  • P228     Mai, A.D., Sheikh, M.N., Hadi, M.N.S.    Australia (NSW)    EXPERIMENTAL STUDY ON SQUARE REINFORCED CONCRETE COLUMNS PARTIALLY AND FULLY WRAPPED WITH CFRP UNDER CONCNETRIC AND ECCENTRIC LOAD
  • P229     Mai, A.D., Sheikh, M.N., Hadi, M.N.S.    Australia (NSW)    BEHAVIOUR OF PARTIALLY CFRP WRAPPED SQUARE AND CIRCULARIZED SQUARE RC COLUMNS UNDER AXIAL COMPRESSION
  • P246     Usefi, N., Ronagh, H.     Australia (NSW)    NUMERICAL EVALUATION OF A HYBRID COLD-FORMED STEEL SHEAR WALL PANEL
  • P272     Kim, T., Tyler Ley, M., Davis, J.M., Kang, S.     Australia (NSW)    AUTOMATED SCANNING ELECTRON MICROSCOPY: SYSTEMATIC PROCEDURE AND APPLICATIONS TO PARTICULATE MATERIALS (abstract only)
  • P273     Shaikh, F.     Australia (WA)    EFFECT OF COOLING METHODS ON RESIDUAL MECHANICAL PROPERTIES AND CRACKING BEHAVIOUR OF GEOPOLYMER CONCRETE EXPOSED TO ELEVATED TEMPERATURES
  • P274     Guo, X., Jiang, P., Zhang, W.     China     NONLINEAR DYNAMICAL ANALYSIS OF A THREE-PHASE COMPOSITE PIEZOELECTRIC PLATE
  • P279     Yu, Y., Chen, X., Wu, D., Gao, W.     Australia (NSW)     STOCHASTIC LEACHING ANALYSIS BASED ON MACHINE LEARNING
  • P281     Ali, S., Liu, X., Fawzia, S., Thambiratnam, D.     Australia (QLD)     NUMERICAL STUDY ON THE FEASIBILITY OF FLEXIBLE RUNWAY PAVEMENT TO RESIST IMPACT LOADING
  • P282     Gholampour, A., Fallah Pour, A., Hassanli, R., Ozbakkaloglu, T.     Australia (SA)     CYCLIC BEHAVIOR OF ACTIVELY CONFINED RUBBERIZED CONCRETE UNDER AXIAL COMPRESSION
  • P283     Gholampour, A., Valizadeh Kiamahalleh, M., Tran, D.N.H., Ozbakkaloglu, T., Losic, D.     Australia (SA)     MECHANICAL PROPERTIES OF CEMENT MORTAR COMPOSITES CONTAINING GRAPHENE OXIDE
  • P284     Chen, L., Makki Alamdari, M.     Australia (NSW)    GUIDED-WAVE-BASED DAMAGE DETECTION IN STEEL PIPES
  • P285     Mohammadi, M., Kafi, M.A., Kheyroddin, A., Ronagh, H.R., Rashidi, M.     Australia (NSW)    EXPERIMENTAL AND NUMERICAL INVESTIGATION OF INNOVATIVE COMPOSITE BUCKLING-RESTRAINED FUSE
  • P286     Yuen, A.C.Y., Yang, W., Yeoh, G.H.     Australia (NSW)    NUMERICAL STUDY OF SURFACE REGRESSION OF A FLAME RETARDED EXPANDABLE POLYSTYRENE
  • P288     O’Shea, D., Attard, M.M., Kellermann, D.C.     Australia (NSW)    HYPERELASTIC FORMULATION FOR BIOLOGICAL MATERIALS (abstract only)
  • P291     Xie, G.H., Wang, C.M., Xie, F.Z., Bian, Y.L.     China     FATIGUE DESIGN CRITERIA FOR ADHESIVELY BONDED ANCHORAGE FOR CFRP TENDON
  • P292     Le, D.B., Dao, V.T.N.    Australia (QLD)    INVESTIGATING MECHANICAL PROPERTIES OF HIGH STRENGTH CONCRETE AT ELEVATED TEMPERATURE USING NEW FIRE TEST SETUP     (abstract only)
  • P294     Tran, S.D., Dao, V.T.N.    Australia (QLD)    STRUCTURAL PERFORMANCE OF REINFORCED CONCRETE COLUMNS SUBJECTED TO VARIOUS HEATING AND LOADING CONDITIONS     (abstract only)
  • P296     Lai, M.H., Ho, J.C.M.     China     EXPEREIMENTAL UNI-AXIAL BEHAVIOUR OF UHSCFST COLUMNS WITH EXTERNAL CONFINEMENT
  • P298     MUKHTAR, F.M.     Saudi Arabia     EARLY-AGE BOND PERFORMANCE IN FRP-CONCRETE SYSTEM AND THE NEED FOR ADDITIONAL TEST PROTOCOL
  • P299     Shi, Q., Heitzmann, M.T., Gattas, J.M.    Australia (QLD)    ANALYSIS OF STEEL ORIGAMI TUBE WITH NONLINEAR ROTATIONAL HINGE STIFFNESS
  • P304     Liu, X.F., Wang, Q., Duan, X.Z., Zhang, Y.X., Yu, K.Q.    Australia (NSW)    MECHANICAL PROPERTIES OF NANO-PARTICLE MODIFIED ULTRA-HIGH PERFORMANCE FIBER REINFORCED CONCRETE
  • P307     Izhar, U., Sul, J., Janse van Rensburg, P.A., Preethichandra, D.M.G., Albermani, F.    Australia (QLD)    AN ELECTROTHERMALLY ACTUATED MEMS BRAILLE DOT
  • P309     Sirach, N., Smith, S.T., Yu, T., Mostafa, A.    Australia (NSW)    CONCRETE COLUMNS CONFINED WITH LARGE RUPTURE STRAIN COMPOSITES: AN EMERGING FIELD
  • P310     Higginson, K.M., Fernando, D., Burnton, P.    Australia (QLD)    OPTIMIZATION FRAMEWORK FOR THE DESIGN OF ADVANCED COMPOSITE STRUCTURES
  • P312     Pickering, E., Wang, C.M., Bo, A., Zhan, H., Gu, Y.T.    Australia (QLD)    RESONANCE OF TAPERED NANOWIRES WITH SURFACE EFFECTS (abstract only)
  • P314     Sanjeewa, R.M.D.M., Fernando, D., Smith, S.T., Wang, C.M.    Australia (QLD)    COMPARISON OF SHEAR CAPACITIES OF RC BEAMS STRENGTHENED WITH FRP FROM VARIOUS DESIGN GUIDELINES
  • P315     Siriwardane, S.C., Dissanayake, R.     Sri Lanka     MESOSCOPIC PLASTIC STRAIN-BASED MULTIAXIAL FATIGUE MODEL FOR RANDOM LOADING
  • P316     Wang, Q., Wu, D., Gao, W.    Australia (NSW)     CIVIL ENGINEERING Ⅱ: WHEN CIVIL ENGINEERING ENCOUNTER ARTIFICIAL INTELLIGENCE (abstract only)
  • P317     Nguyen, V.T., Fernando, D.    Australia (QLD)     DEVELOPMENT OF HYBRID SIMULATION FOR TESTING BRIDGES UNDER MOVING LOADS
  • P318     Wang, W., Qiu, C., Chen, S.J., Duan, W.    Australia (VIC)     ROLE OF MULTIFUNCTIONAL SULFONATED GRAPHENE OXIDE IN FOAM CONCRET SYSTEM: REINFORCEMENT AND SURFACTANT
  • P319    Liu, Y.M., Lin, R., Chen, S.j., Duan, W.    Australia (VIC)     FEM SIMULATION OF OCARINA-SHAPED PIEZOELECTRIC WIND ENERGY HARVESTER

Papers in special sessions

SS01: Pipelines

 

Dr Hassan Karampour
– Griffith University

Prof Hong Guan
– Griffith University

Prof Faris Albermani
– Central Queensland University

Papers:
P048     Binazir, A., Karampour, H., Gilbert, B.P., Guan, H.     Australia (QLD)    BENDING CAPACITY OF PIPE-IN-PIPE SYSTEMS SUBJECTED TO EXTERNAL PRESSURE
P049     Piran, F., Karampour, H., Woodfield, P., Mason, M.     Australia (QLD)     VORTEX-INDUCED VIBRATION OF TWO-DIMENSIONAL HEXAGONAL CYLINDERS WITH CORNER AND FACE ORIENTATIONS
P028     Bi, K., Hao, H., Nikoo, H.M.     Australia (WA)     USING PIPE-IN-PIPE SYSTEMS FOR THE SUB-SEA PIPELINE VIBRATION CONTROL
P035     Rathnayaka, S., Shannon, B., Deo, R., Fu, G., Kodikara, J.     Australia (VIC)     FAILURE PREVENTION OF LARGE-DIAMETER CAST IRON WATER PIPES USING LEAK-BEFORE-BREAK CONCEPT
P037     Melchers, R.E., Ahammed, M.     Australia (NSW)     EXTREME VALUE STATISTICS FOR PITTING CORROSION OF STEEL PIPELINES
P100     Tran, H.D., Setunge, S., Shi, L.     Australia (VIC)     A CASE STUDY ON THE REMAINING STRENGTH OF STORMWATER DRAINAGE PIPES

SS02: Wind Loading of Structures

 

Dr Matthew Mason
– University of Queensland

Papers:
P074     Mohotti, D., Wijesooriya, K., Xing, F.     Australia (NSW)     DYNAMIC PERFORMANCE OF STEEL POLES AND ITS LONGEVITY DUE TO INDUCED LOADS FROM DYNAMIC WIND (abstract only)
P078     Humphreys, M.T., Ginger, J.D., Henderson, D.J.     Australia (QLD)    EFFECT OF OPENING SIZE AND WIND SPEED ON INTERNAL
PRESSURES IN FULL-SCALE BUILDINGS
P177     Navaratnam, S., Henderson, D., Ginger, J.     Australia (QLD)     WIND LOAD SHARING AND INFLUENCE COEFFICIENTS FOR HOUSE ROOF STRUCTURES
P247     Bodhinayake, G.G., Ginger, J.D., Henderson, D.J.     Australia (QLD)    NET CLADDING PRESSURES ON INDUSTRIAL BUILDING ROOFS
P061     Stewart, M.G., Masia, M.J., Li, J.     Australia (NSW)     STOCHASTIC WIND FIELD MODELS AND THEIR EFFECT ON THE STRUCTURAL RELIABILITY OF MASONRY WALLS
P305     Lyu, J., Wang, C.M., Mason, M.S.  Australia (QLD)    ASSESSMENT OF EMPIRICAL MODELS FOR PREDICTING WIND SPEED REDUCTION IN THE LEE OF WINDBREAKS (abstract only)
P306     Mason, M.S.     Australia (QLD)     REANALYSIS OF DESIGN WIND SPEEDS IN QUEENSLAND, AUSTRALIA (abstract only)
P313     Eftekharian, E., Ghodrat, M., He, Y., Ong, R.H., Kwok, K.C.S., Samali, B.     Australia (NSW)     NUMERICAL SIMULATION OF THE EFFECT OF TERRAIN SLOPE ON WIND-FIRE ENHANCMENT

SS03: Latest advances in Structural Health Monitoring in Australia

 

Dr Tommy Chan
– Queensland University of Technology

Dr Andy Nguyen
– University of Southern Queensland

Papers:
P289     Nguyen, T.N., Yu, Y., Li, J., Sirivivatnanon, V.     Australia (NSW)     AN OPTIMISED SUPPORT VECTOR MACHINE MODEL FOR ELASTIC MODULUS PREDICTION OF CONCRETE SUBJECT TO ALKALI SILICA REACTION
P231     Ay, A.M., HKHOO, S., Wang, Y.    UK     A TIME-DOMAIN DAMPING ESTIMATION METHOD FOR VIBRATION-BASED STRUCTURAL DAMAGE IDENTIFICATION
P232     Li, J., Fan, G., Hao, H., Li, H.     Australia (WA)    AN IMPROVED SSI APPROACH FOR STRUCTURAL MODAL IDENTIFICATION
P233     Phung, J., Li, J.C., Lu, Y.     Australia (NSW)     A NOVEL WAVE BASED APPROACH FOR CRACK DETECTION IN CONCRETE
P234     Nguyen, L.T., Haritos, N.     Australia (VIC)     A MINIATURE BLUETOOTH TRI-AXIAL ACCELEROMETER UNIT SUITABLE FOR EMA APPLICATIONS
P235     Joseph, J.T., Chan, T.N.T., Nguyen, A., Nguyen, K.D.     Australia (QLD)     DAMAGE IDENTIFICATION OF CIVIL STRUCTURES USING MODAL KINETIC ENERGY CHANGE APPROACH
P236     Li, J.T., Zhu, X.Q., Samali, B.     Australia (NSW)     BRIDGE OPERATIONAL MODAL IDENTIFICATION USING SPARSE BLIND SOURCE SEPARATION
P290     Tang, Z.S., Lim, Y.Y., Smith, S.T.     Australia (NSW)     A STUDY ON MONITORING THE CURING PROCESS OF STRUCTURAL ADHESIVES USING WAVE PROPAGATION

SS04: Computational Fracture and Failure Analysis

 

A/Prof Daniel Dias-da-Costa
– University of Sydney

A/Prof Giang Nguyen
– University of Adelaide

Prof Chongmin Song
– University of New South Wales

Papers:
P200     Tran, H.T., Wang, Y., Bui, H.H., Nguyen, G.D., Kodikara, J., Sanchez, M.     Australia (VIC)     MODELLING MULTIPLE FRACTURE NETWORKS IN CLAYEY SOILS USING MESH- FREE SPH METHOD (abstract-only)
P191     Le, L.A., Nguyen, G.D., Bui, H.H., Sheikh, A.H., Kotousov, A.     Australia (SA)    LOCALISATION AND LODE-ANGLE DEPENDENCE OF GEOMATERIAL BEHAVIOUR
P166    Shen, L., Sharafisafa, M., Xu, Q.    Australia (NSW)     STUDYING DEFORMATION AND FRACTURING OF 3D PRINTED ROCK-LIKE MATERIAL USING DIGIAL IMAGE CORRELATION (abstract-only)
P121     Carvalho, M.R., Dias-da-Costa, D, Barros, J.A.O.     Australia (NSW)     AN EMBEDDED CRACK MODEL FOR THE SIMULATION OF THE COMPLEX INTERACTIONS IN FIBRE REINFORCED CONCRETE (abstract-only)
P118     Vafajou, B., Dias-da-Costa, D, Bitencourt, L.A.G., Manzouli, O.L.     Australia (NSW)     COUPLING FINITE ELEMENTS FOR MODELLING FLUID FLOW IN FRACTURED POROUS MEDIA
P093     Ghazlan, A., Le, V.T., Nguyen, T., Ngo, T.D.     Australia (VIC)    A NOVEL MODELLING APPROACH TO CAPTURE THE DAMAGE MECHANISMS IN NACRE-MIMETIC COMPOSITES
P095     Linforth, S., Imbalzano, G., Ngo, T.D., Tran, P., Odish, R., Ruan, D.   Australia (VIC)    DESIGN AND ANALYSIS OF 2D ALUMINIUM AUXETIC STRUCTURES FOR DYNAMIC LOADING
P144     Saleh, Z., Neaz Sheikh, M., Remennikov, A.M., Basu, A.     Australia (NSW)     BEHAVIOUR OF CONCRETE BEAMS REINFORCED WITH GFRP BARS UNDER IMPACT LOADS
P097     Sinaie, S., Ngo, T.D., Le, V.T.     Australia (VIC)     SIMULATION OF CELLULAR STRUCTURES UNDER LARGE DEFORMATIONS USING THE MATERIAL POINT METHOD
P196     Zhang, J.Q., Song, C.M.     Australia (NSW)     DISCRETE MODELING OF FIBER REINFORCED MATERIAL USING THE SCALED BOUNDARY FINITE ELEMENT METHOD (abstract-only)
P195     Xing, W., Song, C.M., Tin-Loi F.     Australia (NSW)     A SCALED BOUNDARY FINITE ELEMENT BASED NODE-TO-NODE SCHEME FOR 3D FRICTIONAL CONTACT PROBLEM (abstract-only)
P222     Suo, S., Gan, Y.     Australia (NSW)     IMBIBITION-INDUCED EFFECTIVE STRESS EVOLUTION IN FRACTURED GEOMATERIALS (abstract-only)
P221     Wei, D., Gan, Y.     Australia (NSW)     COMBINED FINITE AND DISCRETE ELEMENT MODELLING OF SINGLE PARTICLE BREAKAGE: THE EFFECTS OF PARTICLE SHAPES (abstract-only)
P116     Zuo, Z.C., Bennett, T.     Australia (SA)     NUMERICAL SIMULATION OF THE INTERACTION BETWEEN CHEMICAL AND MECHNICAL DAMAGE FOR CEMENTITIOUS MATERIALS

SS05: Shrinkage and Cracking in Early-age Concrete

 

Prof Ian Gilbert
– University of New South Wales

Dr Vinh Dao
– University of Queensland

Papers:
P112     Gilbert, R.I.     Australia (NSW)     EARLY-AGE CRACK CONTROL IN REINFORCED CONCRETE MEMBERS WITH END RESTRAINT
P150     Gowripalan, N.     Australia (NSW)    AUTOGENOUS SHRINKAGE OF CONCRETE AT EARLY AGES
P149     Matar, F., Castel, A., Gilbert, I.R.     Australia (NSW)    EARLY-AGE UNRESTRAINED AUTOGENOUS SHRINKAGE IN BLENDED CEMENT-BASED PRISMS
P239     Li, L., O’Moore, L., Dux, P., Lura, P., Dao, V.T.N.     Australia (QLD)    EVOLUTION OF COEFFICIENT OF THERMAL EXPANSION OF CONCRETE AT EARLY AGES
P168     Thilakarathna, P.S.M., Mendis, P., Nanayakkara, S.M.A., Sofi, M., Kristombubaduge, K.S.     Australia (VIC)     EVALUATION OF THERMAL CRACKING RISK IN MASS CONCRETE STRUCTURES
P303     CHILWESA, M., AKBARNEZHAD, A., GHAREHCHAEI, M., CASTEL, A., LLOYD, R., FOSTER, S.     Australia (NSW)     USING THE DOUBLE RING TEST TO ASSESS THE EFFECT OF TYPE OF AGGREGATE USED ON THERMAL CRACKING POTENTIAL OF CONCRETE
P302     BOCCIARELLI, M., RANZI, G.     Australia (NSW)     EVALUATION OF SHRINKAGE-INDUCED DEFLECTIONS OF COMPOSITE SLABS WITH A SIMPLIFIED DESIGN APPROACH AND A HYGRO-THERMO-CHEMICAL-MECHANICAL MODEL

SS06: Recent Advances in Technologies for Structural Safety and Disaster Mitigation

 

Prof Chunwei Zhang
– Qingdao University of Technology

Prof Li Sun
– Shenyang Jianzhu University

Papers:
P240     Miao, Y., Zhang, C.W., Cao, J.F., Li, X.J    China     APPLICATION OF SYMMETRIC BILINEAR INITIATING TECHNIQUE IN PILE BLASTING
P241     Sun, L., Yang, Z., Zhang, C.W., Zhu, C.    China    STUDY ON COMPRESSION PERFORMANCE OF GFRP REINFORCED CONCRETE COLUMNS UNDER SEAWATER ENVIRONMENT WITH NEW TEST METHOD
P242    Jiang, S., Zhang, H., Wang, Z.    China    FRAGILITY ANALYSIS OF BRB CFST FRAME STRUCTURE UNDER MAIN SHOCK-AFTERSHOCK SEQUENCES
P243     Qin, G., Liu, G., Zhang, S.    China    THE INFLUENCE OF THE TIE MEMBER DEVIATING FROM THE MAIN NODE ON THE MAXIMUM BENDING MOMENT OF THE SCAFFOLD UPRIGHT TUBE
P244     Yang, G., Li, B.     China     MONITORING AND ANALYSIS OF AXIAL FORCE OF STEEL SUPPORT IN DEEP FOUNDATION PIT OF SHENYANG METRO STATION
P245     Xu, L., Chen, Y.    China    A MULTI-OBJECTIVE GROUND MOTION SELECTION APPROACH BASED ON THE ACCELERATION AND DISPLACEMENT RESPONSE SPECTRA
P171     Li, H.W., Chen, W.S., Hao, H.     Australia (WA)     NUMERICAL STUDY OF PRECAST CONCRETE BEAM WITH WET CONNECTIONS UNDER IMPACT LOADS

SS07: Life-cycle performance-based design, control, and monitoring of structural systems

 

Prof Chunwei Zhang
– Qingdao University of Technology

Prof Li Sun – Shenyang Jianzhu University

Dr Limeng Zhu
– Qingdao University of Technology

Papers:
P249     Xu, J., Hao, J.J., Dong, J.H., Gou, K.K., Zhang, C.W.     China    STUDY ON THE DAMAGE IDENTIFICATION OF SPACE STEEL STRUCTURES BASED ON AR MODEL AND BP NEURAL NETWORK
P250     Li, C., Sun, L., Su, Z., Liang, T., Zhao, Z.     China    DESIGN AND PERFORMANCE OF A HIGH PRECISION DISPLACEMENT SENSOR WITH SPRING
P251     Zhang, Y., Jia, L.G., Qiao, P.Z.    China    RESEARCH ON THE INFLUENCE OF SMART AGGREGATE DEFLECTED ANGLE ON THE ACCURACY OF MEASURING THE ELASTIC MODULUS OF CONCRETE
P252     Fu, W., Zhang, C.W., Duan, C.     China     EXPERIMENTAL RESEARCH ON MAGNETORHEOLOGICAL DAMPER WITH PASSIVE ISOLATION SHAKING TABLE
P300     Zhu, L.M., Zhang, C.W., Xiao, H.X.     China     SHEAR STRENGTH OF SQUAT CIRCULAR CONCRETE-FILLED STEEL TUBE COLUMNS
P301     Duan, C., Zhang, C.W., Fu, W.,     China     SEISMIC RESPONSE ANALYSIS OF INTER-STORY ISOLATION STRUCTURES BASED ON FRICTION PENDULUM BEARINGS

SS08: Crumbed Rubber Concrete (CRC) and its application to civil engineering

 

Prof Yan Zhuge
– University of South Australia

Prof Tuan Ngo
– University of Melbourne

Papers:
P068     Li, D., Zhuge, Y., Rahman, M., Ma, X.     Australia (SA)     MIX DESIGN AND MECHANICAL PROPERTIES OF RUBBERIZED CEMENT STABILIZED SOIL (RCSS) PAVERS
P056     Yi, O., Zhuge, Y., Ma, X., Gravina, R., Mills, J.E.     Australia (SA)     SMALL-SCALE PULL-OUT TESTING ON BOND BEHAVIOR OF PROFILED STEEL REINFORCED CRC COMPOSITE SLABS
P041     Eltayeb, E., Ma, X., Zhuge, Y., Youssf, O.     Australia (SA)     FRESH AND HARDENED PROPERTIES OF INNOVATIVE FOAMED-RUBBERIZED CONCRETE
P254     Karim, R., Rahman, M, Dawson, A, Kumar, M, Wegener, L.     Australia (SA)     TYRE-DERIVED AGGREGATES IN PAVEMENT SUBBASES
P255     Abd-Elaal, E., Al-Bataineh, A.S., Mills, J.E.,Whittle, J., Zhuge, Y.     Australia (SA)     ENHANCING MECHANICAL PROPERTIES OF RUBBERISED CONCRETE WITH NON-THERMAL PLASMA TREATMENT
P256     Ma, X., Zhuge, Y., Li, D., Gorjian, N.    Australia (SA)     STRUCTURAL PROPERTIES OF LIGHT-WEIGHTED RUBBERIZED CONCRETE
P160     Ngo, T.D., Kashani, A., Linforth, S.     Australia (VIC)     VALORISATION OF RECYCLED TYRE CRUMB IN CONCRETE ROAD BARRIER AND BLAST RESISTANT CONCRETE
P159     Kashani, A., Ngo, T.D     Australia (VIC)  CONCRETE COMPOSITE FOAM INSULATOR WITH SURFACE-ACTIVE RECYCLED TYRE CRUMB

SS09: Very Large Floating Structures (VLFS)

 

Prof CM Wang
– University of Queensland

Papers:
P193     Kang, S., Jung, K.H., Lee, S.H., Kim, H.S., Choi, Y.H.     South Korea     MODULAR CONSTRUCTION METHOD FOR CONCRETE FLOATING QUAY WALL AT INCHEON HARBOR
P271     Nguyen, X.V., Luong, V.H., Cao, T.N.T., Tran, M. T.     Vietnam     A MOVING ELEMENT METHOD FOR HYDROELASTIC RESPONSE OF A FLOATING THIN PLATE DUE TO A MOVING LOAD
P016     Nguyen, H.P., Wang, C.M., Pedroso, D.M.     Australia (QLD)     A PITCHING WEC-TYPE ATTACHMENT FOR EXTRACTING WAVE ENERGY AND REDUCING HYDROELASTIC RESPONSE OF VLFS
P277     Adam, F., Walia, D., Harmann, H., Schunemann, P., Grossmann, J.     Germany     A NOVEL MODULAR TLP-DESIGN FOR OFFSHORE WIND TURBINES USING ULTRA HIGH PERFORMANCE CONCRETE
P308     Chu, Y.I.     Australia (QLD)     DEVELOPMENT OF ROTATING OFFSHORE FISH CAGES (abstract only)
P311     Park, J.C., Wang, C.M.     Australia (QLD)     HEXAGON: A MEGA OFFSHORE FLOATING FISH FARM (abstract only)

SS10: Intelligent and Resilient Infrastructure

 

Prof Ranjith Dissanayake
– University of Peradeniya

Prof Sujeeva Setunge
– RMIT University

Papers:
P216     WIJESOORIYA, W., Siriwardane, S.C., Dissanayake, R.     Sri Lanka     FATIGUE ASSESSMENT OF CORRODED BRIDGES: A PROBABILISTIC APPROACH
P167     Peiris, A., Harik, I.     USA     CFRP ROD PANEL RETROFIT OF IMPACT DAMAGED RC BRIDGE GIRDERS
P257     Bandara, C.S., Jayasinghe, J.A.S.C., Dissanayake, P.B.R.     Sri Lanka    IMPROVING STRUCTURAL STABILITY OF SCHOOL BUILDINGS USED AS TEMPORARY EVACUATION CENTERS IN SRI LANKA
P088     Singh, J., Robert, D., Giustozzi, F., Setunge, S., O’Donnell, B.     Australia (VIC)     PREDICTION OF MOISTURE DEGRADATION IN ENZYME- STABILIZED UNSEALED ROAD PAVEMENTS
P295     Setunge, S., Shi, L.     Australia (VIC)     RISK ASSESSMENT OF TIMBER BRIDGE UNDER BUSHFIRE EVENT BASED ON TWO-WAY FLUID STRUCTURE INTERACTION MODELLING
P280     Lokuge, W., Fraser, C., Karunasena, W.     Australia (QLD)     PERFORMANCE OF BRIDGES WITH DAMAGED ELEMENTS IN EXTREME FLOOD EVENTS
P297     Setunge, S., Lokuge, W., Karunasena, W.     Australia (QLD)     FLOODWAY DESIGN PROCESS REVISITED

SS11Research on Mechanics of Structures in Hong Kong

 

A/Prof Paul Heung-fai Lam
– City University of Hong Kong

A/Prof Kostas Senetakis
– City University of Hong Kong

Papers:
P258     Adeabgo, M., Lam, H.F.     Hong Kong     A FEASIBILITY STUDY ON DAMAGE DETECTION OF NONLINEAR RAILWAY BALLAST BY MEASURED VIBRATION OF IN-SITU SLEEPER
P259     Sandeep, C.S., Senetakis, K.     Hong Kong    AN EXPERIMENTAL MICROMECHANICAL STUDY ON THE SHEARING BEHAVIOR OF SOIL
P260     Niu, X., Ji, H., Chen, B.     Hong Kong     DESIGN OF CRACK RESISTANT DENTAL COMPOSITE (abstract-only)
P261     Liu, X.F., He, X.Q., Wang, J.B.     Hong Kong    INVESTIGATION OF FRACTURE IN GRAPHENE SHEETS BASED ON PERIDYNAMICS
P262     Cheng, Z., Wang, J.F.     Hong Kong     ON THE MEASUREMENT OF 3D KINEMATICS AND PARTICLE CRUSHING OF GRANULAR MATERIALS UNDER QUASI-STATIC SHEAR USING X-RAY MICRO-TOMOGRAPHY
P263     Zhou, A., Qin, R., Lau, D.     Hong Kong     EFFECT OF CARBON NANOTUBES TREATED AGGREGATES ON COMPRESSIVE STRENGTH OF CONCRETE
P275     Zhou, W.H., Chen, W.B.     China    TWO-DIMENSIONAL SOIL-STRUCTURE INTERFACE SHEARING CHARACTERISTICS BY DISCRETE ELEMENT METHOD
P276     Yang, J.H., Lam, H.F.     China     AN EFFICIENT MARKOV CHAIN MONTE CARLO METHOD FOR BAYESIAN SYSTEM IDENTIFICATION OF TOWER STRUCTURES

SS12Numerical method and applications in Engineering

 

Prof Chunwei Zhang
– Qingdao University of Technology

Dr Jinfeng Cao
– Qingdao University of Technology

Papers:
P264     Liu, Z., Ma, L., Wen, L., Cao, J., Wei, Y.     China    A HIGH ORDER SHEAR COMPOSITE BEAM APPROACH FOR CORD-RUBBER TIRE BELT MECHANICS
P265     Cao, J., Zhang, C.W., Miao, Y.S., Xu, X.L., Yang, R., Huang, W.    China     STABILITY EVALUATION OF SUBMARINE SLOPE BASED ON FINITE ELEMENT STRENGTH REDUCTION METHOD
P266     Gao, D.W., Zhang, C.W.     China    A NUMERICAL STUDY OF SANDWICH PANEL WITH AUXETIC CORES UNDER IMPACT LOADING
P267     Sun, W., Fu, T., Sun, L.     China    NUMERICAL SIMULATION RESEARCH ON THE STRENGTH MONITORING METHOD OF CONCRETE IN FULL AGE BASED ON PIEZOELECTRIC WAVE METHOD
P268     Hou, S.W., Ma, S.H., Xin, Z.G., Wang, H., Wang, Y.N.     China    RESEARCH ON LOCAL STRENGTH STEP REDUCTION METHOD AND RELATED PARAMETERS
P269     Liu, L.     China     STRAIN SEPARATION OF EARLY AGE CONCRETE WITH THE BURIED SELF-REGULATION HEATING BELT